Pipe clamps are usually found in connecting and sealing two round pipe pieces. They come majorly in two styles.
Traditional pipe clamp – It is a horse shoe shaped round stock piece featuring threads on the ends and another little bit of a half-round flat stock containing holes on every end. The threaded ends of the initial piece are designed to go through lock nut pairs plus they can be tightened.
Flat band clamp – The style is primarily applied to the exhaust pipes of stainless steel and is normally extended to seal joints without distorting the form of the pipe. best moisture meter for home inspectors The soft stainless steel flat piece is wrapped round the connecting pipes and a bolt can be used to tighten in order that the two pipe clamp ends are fastened together to achieve a connection seal.
Tips to Use Pipe Tube Clamps
When working with pipe clamps on exhaust pipes on vehicles or plumbing applications, it isn’t advisable to over tighten the clamp. This could lead to pipe distortions resulting in leaks that cannot be sealed. It could also result in crushed pipe creation making separation impossible down the road. For a clamp that’s properly sealed, you should apply equal amounts of pressure on both clamp sides and then turn the nuts a full turn using a wrench when they are finger tight.
For plumbing pipes, it is suitable to utilize the band type clamp. This is because it is not susceptible to cracks and they usually do not crush the plastic pipe. The flat cradle clamp will however be perfect for supporting or hanging plastic pipes. The reason being it does not end up surrounding the pipe, but creates a cradle support type suspended from a long threaded rod that is attached to a ceiling joist or floor joist.
When using pipe clamps on high heat areas such as exhaust pipes of a car, it is best to install them with an anti-seize compound that can be applied to clamp threads. This can help in ensuring the clamp will undoubtedly be easy to remove down the road if the need arises. It really is something that will undoubtedly be particularly helpful with a chrome exhaust pipe of show type vehicles. The anti-seize application can even be done under or in the clamp on mating surfaces of exhaust pipes to assist easy system removal whenever necessary.
Choosing Pipe Clamps
The fact is that there are so many Camlock fitting manufacturers today offering a variety of products including Camlock couplings, pipe and tube clamps. To get the best bang for your buck, it is advisable to decide on a reputable and reliable manufacturer. This will ensure that you get top quality products. When looking at the available pipe tube clamps, think about the efficiency as far as your application needs are concerned. The dimensional accuracy is also of importance since a lack in the same will give you sealing issues when you really want to keep leakages away. Durability and the reliability of the pipe clamps are other things to consider before making the ultimate solution.